Cutting accuracy is the first factor in determining the quality of a laser cutting machine. Below, the editor will explain to you the four major factors that affect the cutting accuracy of laser cutting machines: The laser coagulation size of the laser generator: If the spot is very small after aggregation, the cutting accuracy is very high, and the gap after cutting is also very small. Then explain Laser cutting machine The accuracy is very high, and the quality is also very high. But the beam emitted by the laser is conical, so the cut gap is also conical. Under these conditions, the thicker the workpiece, the lower the accuracy, resulting in a larger cutting seam. The accuracy of the workbench: If the accuracy of the workbench is very high, the cutting accuracy will also be improved accordingly. Therefore, the accuracy of the workbench is also a very important factor in measuring the accuracy of the laser generator. Laser beam condenses into a cone shape: When cutting, the laser beam is directed downwards in a cone shape. If the thickness of the workpiece being cut is very large, the cutting accuracy will decrease, and the gap cut will be very large. Different cutting materials: can also affect Laser cutting machine The precision. In the same situation, the accuracy of cutting stainless steel and cutting aluminum will be very different. The cutting accuracy of stainless steel will be higher, and the cutting surface will also be smoother.