There are not many important components of a carving machine, among which the cutting tool is one. The selection and installation of carving machine tools are very important for the use of carving machines. When we are using carving machines, installing and disassembling tools is also an indispensable step. So it's best for everyone to master the specific methods and processes. The performance of the engraving machine itself is certainly important, but the choice of engraving machine cutting tools also affects the processing effect and efficiency. You get what you pay for, no matter what kind of things we buy, this saying makes perfect sense. A good carving machine has high machine configuration and high-quality accessories, so the price is definitely high.
  Precautions for loading and unloading carving machine knives:
1. When cutting, use gasoline or WD40 cleaning agent to clean the clamp and pressure cap.
2. The chuck should be placed into the pressure cap, otherwise the tool is not easy to install correctly. If the chuck is not clamped in the pressure cap, it will be stuck in the motor shaft and cannot be removed when the tool is unloaded.
3. Before clamping, pay attention to whether the chuck matches the selected tool, otherwise the tool cannot be tightened.
4. When clamping the tool, the part of the tool that extends out of the chuck should not be too long, otherwise it is easy to produce vibration during the machining process, which affects the machining quality of the workpiece surface.
5. When changing the tool, it is necessary to ensure that the spindle speed is zero, that is, the tool can only be disassembled when the spindle is stopped, otherwise serious personal injury accidents may occur.
6. If using presser foot carving, the dust on the presser foot and spindle must be cleaned with a vacuum cleaner before clamping the tool.
7. During the process of tightening the pressure cap upwards, be sure to align the pressure cap with the rotor thread, and first use your hands to easily screw it into place.
8. When unloading the knife, it is necessary to clean the debris on the pressure cap and rotor shaft before unloading the knife.